Miniature PCM Remote Control 2 | Elektor Magazine

Become a Member
€5 (FREE for Members)
Article

Miniature PCM Remote Control 2

the software protocol

Miniature PCM Remote Control 2
In this second and final part of the remote control design we put it all together and take a closer look at the workings of the transmitter and receiver software.As with any communication system it is necessary to decide on a suitable message format to convey the information. This system does not need to comply with any existing communication standard so we are free to design our own. The main objectives are to enable a high data rate together with good reliability and error detection. The specification of the transmitters and receivers must also be considered to ensure, for example, we do not exceed the maximum clock rate or channel bandwidth. With these constraints in mind a message protocol is used (Figure 1) that is suitable for transmission using either IR or RF.
EUR

Continue reading this article with an Elektor Membership.
Join tens of thousands of engineers and electronics enthusiasts worldwide as a member. Enjoy access to Elektor Magazine, the Elektor library, exclusive discounts, early notification about Academy Pro products, and more. Select a membership today and start exploring everything Elektor has to offer. Log in here if you are already a member.

PRINT (Gold)

  • 8x Elektor Magazine (Print)
  • 8x Elektor Magazine (Digital)
  • Access to the Elektor Archive*
  • Access to over 5,000 Gerber files
  • At least 10% Member Discount on Elektor Store*
€ 144.95
Price per year

plus a delivery charge of 20 euros (US, UK, Ireland).

*Member discount and unlimited archive access only for full GOLD or GREEN members. Trial members have limited access to the online archive.

 

DIGITAL (Green)

  • 8x Elektor Magazine (Print)
  • 8x Elektor Magazine (Digital)
  • Access to the Elektor Archive*
  • Access to over 5,000 Gerber files
  • At least 10% Member Discount on Elektor Store*
€ 99.95
Price per year
or
€ 20.00
4 month trial
You can only subscribe to a trial once.

* Member discount and unlimited archive access only for full GOLD or GREEN members. Trial members have limited access to the online archive.

 

BUY THIS ARTICLE (PDF)

Get instant access to this Elektor article and keep it forever. Download your PDF today and dive into Elektor’s world of innovation and electronics know-how.
€ 5.00
 

Materials

Gerber file

CAM/CAD data for the PCB referred to in this article is available as a Gerber file. Elektor Green and Gold members can exclusively download these files for free as part of their membership. Gerber files allow a PCB to be produced on an appropriate device available locally, or through an online PCB manufacturing service.

Elektor recommends the Elektor PCB Service service from its business partner Eurocircuits or Eurocircuits as the best services for its own prototypes and volume production.

The use of our Gerber files is provided under a modified Creative Commons license. Creative Commons offers authors, scientists, educators and other creatives the freedom to handle their copyright in a more free way without losing their ownership.

PCB

Component list

Transmitter
Resistors:
R1 = 470Ohm
R2,R3 = 18kOhm
R3 = 10kOhm
R4 = 1kOhm
R5 = 10Ohm
R6 = 100kOhm
P1-P4 = potentiometer, 20kOhm , linear
P5-P8 = joystick (CTS # 252A104A60TB with internal switch)
Capacitors:
C1 = 220µ F 16V
C2,C3 = 15pF
Semiconductors:
D1 = TSUS5201 or LD271
D2 = LED, red, 3mm
T1 = ZTX603 (Zetex) or TIP110
IC1 = 87LPC768FN, programmed, order code 010205-41
Miscellaneous:
X1 = 6MHz quartz crystal
S3 = on/off switch, 1 make contact
S4 = 4-way DIP switch
JP1 = 2-way pinheader with jumper
UT1 = 433MHz transmitter module type TX2 from Radiometrix (Farnell)
Battery holder for 3 AA cells
PCB, order code 010205-1
Receiver
Resistors:
R1 = 470Ohm
R2,R9 =27kOhm
R3,R8 = 10kOhm
R4 = 100Ohm
R5,R6,R7 = 100kOhm
Capacitors:
C1,C2 = 15pF
C3 = 10µ F 16V
C4,C6 = 100nF
C5 = 470µ F 16V
C7 = 220µ F 16V
Semiconductors:
D1 = LED, red, 3mm
D2 = MBR745
T1 = SUP75N03, IRL2203
T2,T3 = BUZ11
T4 = IRF4905L (International Rectifier)
T5 = BC547
IC1 = 87LPC762BN, programmed, order code 010205-42
IC2 = SFH5110-36 (Siemens)
IC3 = LM2940
Miscellaneous:
X1 = 6MHz quartz crystal
S1 = on/off switch, 1 make contact
JP1,JP2 = 2-way pinheader with jumper
4 servo connector plugs, 3-way
UR1 = 433MHz RX2 receiver module from Radiometrix (Farnell)
PCB, order code 010205-2
Disk, project software, order code 010205-11

Discussion (0 comments)

Embed Code
archive